Hy-dit hydit200 Installationsanleitung PDF herunterladen (Seite 5)

Step 4

Step 3

Installation of Box

Install and level box in the opening. Mark the centers of the six mounting screws (see fig 3). Remove box

to drill out marked holes using a 13/64” drill bit. If holes are over a stud do not drill or use a plastic anchor. Install

plastic anchors in drilled holes; tap lightly so the anchor head is flush with drywall. Reinstall box using the #10 x

1” screws, either into the plastic anchors or directly into the stud.

Figure 4

1 2 3 4 5 6

Keine Kommentare

Hy-dit hydit200 Installationsanleitung Seite 5